AUTO SETUP (IntelliBeam)

Error messages for AUTO SETUP

Before the AUTO SETUP procedure starts

Error message

Cause

Remedy

See

page

 

 

 

 

 

 

 

ERROR E-2

The IntelliBeam microphone is not

Connect the IntelliBeam microphone to

36

No MIC detected. Please check

connected to this unit.

this unit.

 

MIC connection and re-try.

 

 

 

 

 

 

 

While the AUTO SETUP procedure is in progress

If one of the errors listed below except E-1 is displayed, press RETURN. In case you have started the AUTO SETUP procedure by pressing AUTO SETUP in step 3, run the procedure again from step 3 after the screen disappears. In case you have started the AUTO SETUP procedure by pressing MENU in step 3, run the procedure again from step 4 after the screen in step 3 is displayed. Run MANUAL SETUP if the problem is difficult to be saved.

Error message

Cause

Remedy

See

page

 

 

 

 

 

 

 

ERROR E-1

There is too much unwanted noise in

Make sure that your listening room is as

Please test in quieter environment.

your listening room.

quiet as possible. You may want to

 

 

 

choose certain hours during the day

 

 

 

when there is not much noise coming

 

 

 

from outside.

 

 

 

 

 

ERROR E-2

The IntelliBeam microphone was

Make sure that the IntelliBeam

36

No MIC detected. Please check

disconnected while the AUTO SETUP

microphone is firmly connected to this

 

MIC connection and re-try.

procedure was in progress.

unit.

 

 

 

 

 

ERROR E-3

Some other operations were performed

Do not perform any other operations

Unexpected control is detected.

on this unit while the AUTO SETUP

while the AUTO SETUP procedure is in

 

Please re-try.

procedure was in progress.

progress.

 

 

 

 

 

ERROR E-4

The IntelliBeam microphone is not

Make sure that the IntelliBeam

36

Please check MIC position. MIC

placed in front of this unit.

microphone is installed in front of this

 

should be set in front of YSP.

 

unit.

 

 

 

 

 

ERROR E-5

The IntelliBeam microphone is not

Make sure that the IntelliBeam

36

Please check MIC position. MIC

placed in the right distance from this

microphone is installed more than 1.8 m

 

should be set above 1.8m/6.0ft.

unit.

(6.0 ft) from the front of this unit and

 

 

 

within 1 m (3.3 ft) from the center height

 

 

 

of this unit.

 

 

 

 

 

ERROR E-6

The IntelliBeam microphone cannot

Make sure that the IntelliBeam

36

Volume level is lower than

collect the sound produced by this unit

microphone is firmly connected to this

 

expected. Please check MIC

because the sound output level is too low.

unit and placed in a proper location. If

 

position/connection and re-try.

 

the problem persists, contact the nearest

 

 

 

authorized Yamaha service center for

 

 

 

assistance.

 

 

 

 

 

ERROR E-7

An internal system error occurred.

Repeat the AUTO SETUP procedure.

Unexpected error happened.

 

 

 

Please re-try.

 

 

 

 

 

 

 

SETUP

English

41 En

Page 43
Image 43
Yamaha YSP-3000 owner manual 41 En, Error messages for Auto Setup, Before the Auto Setup procedure starts

YSP-3000 specifications

The Yamaha YSP-3000 is a revolutionary digital sound projector that has carved a niche for itself in the realm of home theater audio systems. Launched as a versatile sound solution, the YSP-3000 integrates cutting-edge technology to deliver an immersive audio experience that mimics that of traditional multi-speaker surround sound systems.

One of the main features of the YSP-3000 is its unique Digital Sound Projector technology. It utilizes a series of miniature speakers arranged in an array to create a broad sound stage. This allows the YSP-3000 to project sound around the room, simulating the effect of surround sound without the need for additional speakers positioned throughout the space. The system employs sophisticated digital signal processing, which fine-tunes the audio output to achieve optimal acoustics tailored to the room’s characteristics.

An impressive characteristic of the YSP-3000 is the inclusion of 7-channel surround sound capabilities. This configuration ensures that users receive an immersive audio experience with clear dialogue and rich sound effects, ideal for movies, music, and gaming. The built-in subwoofer further enhances the low-end frequencies, providing deep bass that adds a layer of excitement to any audio playback.

The YSP-3000 also features Yamaha’s proprietary YSP sound field processing, which allows users to choose from multiple sound field modes to match their audio content. From gaming to music listening, users can select the option that best complements their experience. The system also supports various audio codecs including Dolby Digital and DTS, ensuring compatibility with a wide range of media formats.

Connectivity options are another strong point of the YSP-3000. It includes multiple HDMI inputs, enabling seamless integration with various devices such as Blu-ray players and gaming consoles. Additionally, it features optical and analog audio inputs, making it versatile enough for older audio devices. The included remote control offers intuitive navigation through settings and modes, making operation easy for users of all levels.

Overall, the Yamaha YSP-3000 stands out as a user-friendly and feature-rich solution for anyone looking to elevate their home theater audio experience without the hassle of multiple speakers and complex wiring. With innovation at its core, the YSP-3000 delivers a sound experience that is both convenient and captivating.