FM tuning
3 Press SEARCH repeatedly until the AUTO | 2 Press FM to select FM as the input source. |
indicator disappears from the front panel | “FM” appears in the front panel display. |
display. |
|
| FM |
SEARCH |
|
| y |
A |
|
| FM | 88.9 | MHz |
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
No colon (:) |
|
| |||
•You can also press INPUT on the front panel repeatedly to select FM as the input source.
•If “XM” appears in the front panel display, press FM/XM again to display “FM” (U.S.A. and Canada models only).
3Press and hold MEMORY for more than three seconds.
If a colon (:) appears in the front panel display, tuning is not available. Press PRESET/TUNE to turn the colon (:) off.
The preset station group and number, the MEMORY indicator, and the AUTO indicator flash. Automatic preset tuning starts from the current frequency and proceeds toward higher frequencies.
4 Press ENTRY ( / ) to tune into the | MEMORY | |
desired station manually. | ||
| ||
ENTRY |
| |
ENTER | Flashes | |
|
y
Hold down the button for quick search.
Automatic preset tuning
You can use the automatic preset tuning feature to store up to 40 FM stations with strong signals (A1 to E8: 5 preset station groups with 8 preset station numbers each). You can recall the preset stations easily by selecting the preset station groups and numbers.
1Set the operation mode selector to TV/AV.
TV/AV
YSP
|
|
|
|
|
|
|
|
|
|
|
|
|
| 88.9 | MHz |
| A1 |
| :FM | ||||
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flashes
When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station.
Notes
•When you overwrite an existing preset station, the previously stored FM station is cleared.
•If the number of automatically preset stations does not reach 40 (E8), this unit automatically stops searching.
•Only FM stations with sufficient signal strength are preset automatically. If the desired station is weak in signal strength, tune into it manually and store it as described in “Manual preset tuning” on page 51.
