Yamaha YSP-3000 Enjoying surround sound, 54 En, Press 5BEAM to select 5 Beam, Notes

Enjoying surround sound

You can enjoy multi-channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Surround for multi-channel playback.

Notes

•When ANGLE TO WALL OR CORNER is set in MANUAL SETUP (see page 74), 5 Beam and 3 Beam cannot be selected.

•To enjoy 5 Beam, Stereo plus 3 Beam, or 3 Beam as the beam mode, you must perform AUTO SETUP or MANUAL SETUP so that the parameters best match your listening environment.

AUTO

VOL MODE SETUP INPUTMODE SLEEP

5BEAM ST+3BEAM 3BEAM

1	2	3
STEREO	MY BEAM	MY SUR.
4	5	6
MUSIC	MOVIE	SPORTS
7	8	9
OFF		SUR. DECODE
0	+10
ENHANCER	ENTRY	MENU
CAT/	ENTER	TV/AV
A-E		YSP

DISPLAYRETURN

(U.S.A. and Canada models)

1Set the operation mode selector to YSP.

TV/AV

YSP

2Press one of the beam mode buttons (5BEAM, ST+3BEAM, 3BEAM, or MY SUR.) to select the desired beam mode for 5.1- channel play back.

5 Beam

Outputs sound beams from the front left, front right, center, surround left, and surround right channels. This mode is ideal for enjoying surround sound effects to the fullest when you watch DVDs recorded in a multi-channel format or play back 2-channel sources in a multi-channel format.

Press 5BEAM to select 5 Beam.

5BEAM

1

Notes

•To achieve the best surround sound effect, make sure that there are no obstacles placed in the path of sound beams in that the objects may prevent the sound beams from rebounding directly off the walls in your listening room.

•The front left and right sound beams are output toward the walls in your listening room.

•“SP Pos. Corner!” appears in the front panel display if INSTALLED POSITION is set to ANGLE TO WALL OR CORNER (see page 74).

5BEAM ST+3BEAM 3BEAM

1 2 3

MY SUR.

6

54 En