DISPLAY MENU
Use to manually adjust the various parameters related to the display.
SET MENU → MANUAL SETUP → DISPLAY MENU
4)DISPLAY MENU
. A)F.DISPLAY SET B)OSD SET C)UNIT SET
[p]/[p]:Up/Down [ENTER]:Enter
■F.DISPLAY SET
(Front panel display settings)
Use to adjust the brightness and display settings of the front panel display.
A)F.DISPLAY SET
. STANDARD DIMMER;;;;;OFF AUTO DIMMER
;;;;;;;;;;;;;OFF SCROLL;;;;;;;;;;;;CONT.
[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return
STANDARD DIMMER (Standard dimmer)
Use to adjust the brightness of the front panel display when you operate this unit by using the control buttons on the front panel or on the remote control.
Choices:
AUTO DIMMER (Auto dimmer)
If no operation is performed for a specified period of time, the front panel display dims. Use to adjust the brightness of the front panel display in this case.
Choices: OFF (the same brightness as the STANDARD DIMMER setting),
SCROLL (Front panel display scroll) (U.S.A., Canada, and Australia models only)
Use to select the mode to display information in the front panel display when operating your iPod or XM Satellite Radio.
Choices: CONT., ONCE
•Select CONT. to continue to scroll the display.
•Select ONCE to scroll the display to the end once, after which the first 15 characters appear and stay.
MANUAL SETUP
■OSD SET (OSD settings)
Use to adjust the display position and to set the display time of the OSD.
B)OSD SET
. OSD SHIFT;;;;;;;;;;0
OSD DISPLAY TIME;;;ON
[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return
OSD SHIFT (OSD shift)
Use to adjust the vertical position of the OSD. Adjust toward the – (minus) direction to raise the position of the OSD, and adjust toward the + (plus) direction to lower it. Choices:
Initial setting: 0
OSD DISPLAY TIME (OSD display time) (U.S.A., Canada, and Australia models only)
Use to set the interval for which the OSD screen is displayed after an operation.
Choices: ON, 10s, 30s
•Select ON to show the OSD screen constantly.
•Select 10s to turn off the OSD screen 10 seconds after an operation.
•Select 30s to turn off the OSD screen 30 seconds after an operation.
y
The OSD display time setting is available for your iPod and XM Satellite Radio (U.S.A. and Canada models only). For details, see pages 4 and 10 in the Reference Guide.
■UNIT SET (Unit settings)
Use this to change the display unit of measurement. Choices: METERS (Australia, Europe, Asia, and Korea
models), FEET (U.S.A. and Canada models)
C)UNIT SET
pMETERS | FEET |
[p]/[p]:Select [ENTER]:Return
•Select METERS to enter distances in meters.
•Select FEET to enter distances in feet.
Note
If you change this setting, the adjusted sound beam settings may change.
OPERATION | ADVANCED |
|
|
English
