Controls and functions
FDVD player/VCR control buttons
Control your DVD player or VCR (see pages 98 and 99).
GMy Beam microphone
Collects the test tones from this unit when using the My Beam
HTV POWER
Turns on the power of your TV or sets it to the standby mode (see page 97).
IAV POWER
Turns on the power of the selected component or sets it to the standby mode (see pages 98 and 99).
JINPUT1
Switches the input source on your TV (see page 97).
KMACRO
Use to set the TV macro (see page 100).
La /5
Switches the preset station number (1 to 8) when this unit is receiving an FM broadcast or XM channel (see
page 52).
MCAT
Switches the preset station group (A to E) when this unit is receiving an FM broadcast or XM channel (see page 52).
NSLEEP
Sets the sleep timer (see page 68).
OINPUTMODE
Toggles between input modes (AUTO, DTS, and ANALOG) (see page 87).
PBeam mode buttons
Change the beam mode settings (see pages 54, 60, and 61).
QSUR. DECODE
Selects the surround mode for playback (see page 57).
RMENU
Displays the setup menu on your TV monitor (see pages 37 and 73).
SOperation mode selector
TRETURN
Selects sleep timer settings or returns to the previous SET MENU screen.
UTV VOL +/–
Adjusts the volume level of your TV (see page 97).
VCH +/–
Changes the channels of your TV, digital satellite tuner, cable TV tuner, or VCR (see pages 97 and 99).
WTV MUTE, CODE SET
Mutes the audio output of your TV (see page 97). Sets up remote control codes (see page 96).
Note
The functions L and M are available only when the FM/XM stations are preset.
Selects the operation mode of this unit. Select YSP when operating this unit and select TV/AV when operating your TV or other AV components.