Connections
Connecting a DVD player/recorder
Connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL INPUT jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO INPUT jacks on this unit in addition to the coaxial digital audio connection.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 20).
Notes
•Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.
•If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see page 27).
|
|
|
|
|
| Rear panel of this unit | |
|
|
|
|
|
| (U.S.A. and Canada models) | |
ANTENNA | AUDIO INPUT | OUT | DIGITAL INPUT |
|
| ||
|
|
| VIDEO | AUX 2 | DVD |
|
|
|
|
|
| COAXIAL |
|
| |
|
|
|
| OPTICAL |
|
| |
DOCK | AUX 1 | TV/STB | SUBWOOFER | AUX 1 | TV/STB | XM | IR IN |
|
|
|
|
|
|
| |
PREPARATION
*For the DVD/VCR combo
player/recorder connection
R | L |
|
| Analog | Coaxial |
| audio | digital |
| output | output |
Video signal to the TV | DVD player/recorder |
Audio
Audio pin cable
Digital audio pin cable
English
