AUTO SETUP (IntelliBeam)

Notes

Make sure that your listening room is as quiet as possible while this unit is performing the AUTO SETUP procedure.

To achieve the best results possible, evacuate yourself from your listening room until the AUTO SETUP procedure is completed so that you may not obstruct the path of sound beams.

Be advised that it is normal for loud test tones to be output during the AUTO SETUP procedure.

The AUTO SETUP procedure may not be run successfully if this unit is installed in one of the rooms described in “Before installing this unit” on page 16. In such cases, run MANUAL SETUP (see page 72) to manually adjust the corresponding parameters.

If an error occurs, an error buzzer is played, the AUTO SETUP procedure stops, and an error message appears on the screen. See “Error messages for AUTO SETUP” on page 41 for appropriate remedies.

y

The AUTO SETUP procedure takes about three minutes maximum. A chime is played when the AUTO SETUP procedure is run successfully.

If there are curtains in your listening room, we recommend following the procedure below.

1.Open the curtains to improve sound reflection.

2.Run BEAM OPTIMZ only.

3.Close the curtains.

4.Run SOUND OPTIMZ only.

You can save the settings optimized by the AUTO SETUP procedure (see page 42). A set of settings optimized according to the specific conditions of your listening environment can be recalled later depending on the varying conditions of your listening environment (see page 43).

1Press STANDBY/ON to turn on the power of this unit.

If a subwoofer is connected to this unit, turn on the power of the subwoofer.

 

STANDBY/ON

 

or

STANDBY/ON

 

Front panel

Remote control

2Set the operation mode selector to YSP.

TV/AV

YSP

3Press MENU.

The SET MENU screen appears on your TV.

SET MENU

. ;MEMORY

MENU;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP

[p]/[p]:Up/Down [ENTER]:Enter

y

The control buttons used for SET MENU are displayed at the bottom of the screen.

To return to the previous screen while using SET MENU, press RETURN.

To exit from the SET MENU screen, press MENU again.

You can start the BEAM+SOUND OPTIMZ procedure simply by pressing and holding AUTO SETUP for more than two seconds. Steps 4 and 5 are skipped and then the screen shown in step 5 is displayed on your TV. Start the AUTO SETUP procedure from step 6.

You can also perform the following operations in the front panel display.

4 Press / to select AUTO SETUP and press ENTER.

The following screen appears on your TV.

ENTER

ENTER

;AUTO SETUP

. 1)BEAM+SOUND OPTIMZ 2)BEAM OPTIMZ only 3)SOUND OPTIMZ only

[p]/[p]:Up/Down [ENTER]:Enter

38 En

Page 40
Image 40
Yamaha YSP-3000 38 En, Set the operation mode selector to YSP, Press / to select Auto Setup and press Enter

YSP-3000 specifications

The Yamaha YSP-3000 is a revolutionary digital sound projector that has carved a niche for itself in the realm of home theater audio systems. Launched as a versatile sound solution, the YSP-3000 integrates cutting-edge technology to deliver an immersive audio experience that mimics that of traditional multi-speaker surround sound systems.

One of the main features of the YSP-3000 is its unique Digital Sound Projector technology. It utilizes a series of miniature speakers arranged in an array to create a broad sound stage. This allows the YSP-3000 to project sound around the room, simulating the effect of surround sound without the need for additional speakers positioned throughout the space. The system employs sophisticated digital signal processing, which fine-tunes the audio output to achieve optimal acoustics tailored to the room’s characteristics.

An impressive characteristic of the YSP-3000 is the inclusion of 7-channel surround sound capabilities. This configuration ensures that users receive an immersive audio experience with clear dialogue and rich sound effects, ideal for movies, music, and gaming. The built-in subwoofer further enhances the low-end frequencies, providing deep bass that adds a layer of excitement to any audio playback.

The YSP-3000 also features Yamaha’s proprietary YSP sound field processing, which allows users to choose from multiple sound field modes to match their audio content. From gaming to music listening, users can select the option that best complements their experience. The system also supports various audio codecs including Dolby Digital and DTS, ensuring compatibility with a wide range of media formats.

Connectivity options are another strong point of the YSP-3000. It includes multiple HDMI inputs, enabling seamless integration with various devices such as Blu-ray players and gaming consoles. Additionally, it features optical and analog audio inputs, making it versatile enough for older audio devices. The included remote control offers intuitive navigation through settings and modes, making operation easy for users of all levels.

Overall, the Yamaha YSP-3000 stands out as a user-friendly and feature-rich solution for anyone looking to elevate their home theater audio experience without the hassle of multiple speakers and complex wiring. With innovation at its core, the YSP-3000 delivers a sound experience that is both convenient and captivating.