Troubleshooting

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center.

General

Problem

Cause

Remedy

See

page

 

 

 

 

 

 

 

This unit fails to turn on

The AC power supply cable is not firmly

Connect the AC power supply cable firmly

29

when STANDBY/ON is

connected to the AC wall outlet.

to the AC wall outlet.

 

pressed, or enters the

 

 

 

This unit has been exposed to a strong

Set this unit to the standby mode, disconnect

standby mode soon after the

power has been turned on.

external electric shock (such as lightning

the AC power supply cable, plug it back in

 

 

and strong static electricity).

after 30 seconds, and use it normally.

 

 

 

 

 

This unit suddenly enters the

The internal temperature becomes too high

Wait for about one hour for this unit to cool

standby mode.

and the overheat protection circuitry has

down and turn it back on.

 

 

been activated.

 

 

 

 

 

 

 

The sleep timer has turned the unit off.

Turn on the power and play back the source

 

 

again.

 

 

 

 

 

No sound.

Incorrect input or output cable connections.

Connect the cables properly. If the problem

19

 

 

persists, the cables may be defective.

 

 

 

 

 

 

No appropriate input source has been

Select an appropriate input source with

45

 

selected.

INPUT or the input selector buttons.

 

 

 

 

 

 

The volume is turned down.

Turn up the volume.

47

 

 

 

 

 

The sound is muted.

Press MUTE or VOLUME +/– to resume

47

 

 

audio output and adjust the volume level.

 

 

 

 

 

 

The signals this unit cannot reproduce (such

Play a source whose signals can be

 

as PCM signals with more than 96 kHz of

reproduced by this unit.

 

 

sampling frequency) are being received

 

 

 

Change the system settings of the source

 

from the source component.

 

 

component.

 

 

 

 

 

 

The HDMI components connected to this

Connect the HDMI components that support

20

 

unit do not support the HDCP copy

the HDCP copy protection standards.

 

 

protection standards.

 

 

 

 

 

 

 

SUPPORT AUDIO is set to OTHER and

Set SUPPORT AUDIO to YSP-3000 in

82

 

HDMI audio signals are not being played

MANUAL SETUP

 

 

back on this unit.

 

 

 

 

 

 

The sound suddenly goes

The sleep timer has turned this unit off.

Turn on the power and play back the source

off.

 

again.

 

 

 

 

 

 

The sound is muted.

Press MUTE or VOLUME +/– to resume

47

 

 

audio output and adjust the volume level.

 

 

 

 

 

No sound from the effect

You are playing back the source or program

Press one of the beam mode buttons on the

54

channels.

in the 2-channel stereo playback or My

remote control to select a multi-channel

 

 

Beam mode.

playback mode and play back the source or

 

 

 

program once more.

 

 

 

 

 

No sound from the center

The output level of the center channel is set

Raise the level of the center channel.

84

channel.

to minimum.

 

 

 

 

 

 

No sound from the surround

The output level of the surround channels is

Raise the output level of the surround

84

channels.

set to minimum.

channels.

 

 

 

 

 

102 En

Page 104
Image 104
Yamaha YSP-3000 owner manual Troubleshooting, 102 En, General

YSP-3000 specifications

The Yamaha YSP-3000 is a revolutionary digital sound projector that has carved a niche for itself in the realm of home theater audio systems. Launched as a versatile sound solution, the YSP-3000 integrates cutting-edge technology to deliver an immersive audio experience that mimics that of traditional multi-speaker surround sound systems.

One of the main features of the YSP-3000 is its unique Digital Sound Projector technology. It utilizes a series of miniature speakers arranged in an array to create a broad sound stage. This allows the YSP-3000 to project sound around the room, simulating the effect of surround sound without the need for additional speakers positioned throughout the space. The system employs sophisticated digital signal processing, which fine-tunes the audio output to achieve optimal acoustics tailored to the room’s characteristics.

An impressive characteristic of the YSP-3000 is the inclusion of 7-channel surround sound capabilities. This configuration ensures that users receive an immersive audio experience with clear dialogue and rich sound effects, ideal for movies, music, and gaming. The built-in subwoofer further enhances the low-end frequencies, providing deep bass that adds a layer of excitement to any audio playback.

The YSP-3000 also features Yamaha’s proprietary YSP sound field processing, which allows users to choose from multiple sound field modes to match their audio content. From gaming to music listening, users can select the option that best complements their experience. The system also supports various audio codecs including Dolby Digital and DTS, ensuring compatibility with a wide range of media formats.

Connectivity options are another strong point of the YSP-3000. It includes multiple HDMI inputs, enabling seamless integration with various devices such as Blu-ray players and gaming consoles. Additionally, it features optical and analog audio inputs, making it versatile enough for older audio devices. The included remote control offers intuitive navigation through settings and modes, making operation easy for users of all levels.

Overall, the Yamaha YSP-3000 stands out as a user-friendly and feature-rich solution for anyone looking to elevate their home theater audio experience without the hassle of multiple speakers and complex wiring. With innovation at its core, the YSP-3000 delivers a sound experience that is both convenient and captivating.