Yamaha YSP-3000 owner manual 3INPUT MENU, Binput Mode, Input Menu, Ainput Assignment, 80 En

MANUAL SETUP

INPUT MENU

Use to manually adjust the various parameters related to the audio and video input.

SET MENU → MANUAL SETUP → INPUT MENU

3)INPUT MENU

. A)INPUT ASSIGNMENT B)INPUT MODE C)INPUT TRIM D)INPUT RENAME E)HDMI SET

F)XM ANTENNA LEVEL

[p]/[p]:Up/Down [ENTER]:Enter

Note

“F) XM ANTENNA LEVEL” is for U.S.A. and Canada models only.

■INPUT ASSIGNMENT (Input assignment)

Use to assign the HDMI IN jacks of this unit to other components if the initial settings of this unit do not correspond to your needs. By assigning other components to the HDMI IN jacks of this unit, you can display the names of the connected components in the front panel display and OSD and operate the components with the input selector buttons of the same name. If you connect a component to one of the HDMI IN jacks of this unit and do not assign a name to it, the default component name for HDMI IN jack is displayed in the front panel and OSD when selected.

• Select HDMI1 to assign a component to the HDMI AUX 1 IN jack of this unit.

Choices: TV/STB, AUX1

• Select HDMI2 to assign a component to the HDMI DVD IN jack of this unit.

Choices: DVD, AUX2

A)INPUT ASSIGNMENT

HDMI
. HDMI1;;;;	AUX1
(	AUX1	)
HDMI2;;;;	DVD
(	DVD	)
[p]/[p]:Up/Down	[p]/[p]:Sel

[ENTER]:Return

■INPUT MODE (Input mode)

Use to designate the input mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. For information on the types of audio signals that can be output by this unit, see “Selecting the input mode” on page 87.

Choices: AUTO, LAST

B)INPUT MODE

pAUTO LAST

[p]/[p]:Select [ENTER]:Return

•Select AUTO to set this unit to automatically detect the type of input signals and select the appropriate input mode.

•Select LAST to set this unit to automatically select the last input mode used for that input source. If the type of input signals is different from the setting, no sounds will be produced.

■INPUT TRIM (Input trim)

Use to adjust the input level of the input source.

C)INPUT TRIM		1/2
. TV/STB	ANALOG;;;-3.0dB
	DIGITAL;;-3.0dB
DVD	DIGITAL;;-3.0dB

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

•Select TV/STB ANALOG to adjust the level of audio and video signals input at the TV/STB AUDIO INPUT jacks of this unit.

Control range: –6.0 dB to 0.0 dB

Initial setting: –3.0 dB

•Select TV/STB DIGITAL to adjust the level of audio and video signals input at the TV/STB OPTICAL DIGITAL INPUT jack of this unit.

Control range: –6.0 dB to 0.0 dB

Initial setting: –3.0 dB

•Select DVD DIGITAL to adjust the level of audio and video signals input at the DVD COAXIAL DIGITAL INPUT jack of this unit.

Control range: –6.0 dB to 0.0 dB

Initial setting: –3.0 dB

80 En