Fax Receive Settings
Menu item
Enable Fax Receive
On
Off
Rings to Answer
Auto Answer
Yes
No
Manual Answer Code
Auto Reduction
On
Off
Paper Source
Auto Size Match
Tray <x>
Single Sheet Feeder
Sides
On
Off
Fax Footer
On
Off
Max Speed
2400
4800
9600
14400
33600
Block No Name Fax
On
Off
Description
Allows fax jobs to be received by the printer
Note: On is the factory default setting.
Specifies the number of rings before answering an incoming fax job Note: 3 is the factory default setting.
Allows the printer to answer an incoming fax job
Note: Yes is the factory default setting.
Lets you enter a code on the telephone number pad to begin receiving a fax
Notes:
•This menu item is used when the printer shares a line with a telephone
•9 is the factory default setting
Scales an incoming fax job so it fits the size of the paper loaded in the designated fax source
Note: On is the factory default setting.
Specifies the paper source selected to supply paper for the printer to print an incoming fax
Note: Tray 1 is the factory default setting.
Enables duplex
Note: Off is the factory default setting.
Prints the transmission information at the bottom of each page from a received fax Note: Off is the factory default setting.
Specifies the maximum speed in baud at which faxes are received Note: 33600 (baud) is the factory default setting.
Enables blocking of incoming faxes sent from devices with no station ID specified Note: Off is the factory default setting.
Understanding printer menus
