PostScript menu
Menu item
Print PS Error
On
Off
Image Smoothing
On
Off
PCL Emul menu
Menu item
Font Source
Resident
Download
All
Font Name
RO Courier
Symbol Set
10U
12U
PCL Emulation Settings
Point Size
Description
Prints a page containing the PostScript error
Note: Off is the factory default setting.
Enhances the contrast and sharpness of
Notes:
•Off is the factory default setting.
•Image Smoothing has no effect on images that are 300 dpi or higher in resolution.
Description
Specifies the set of fonts used by the Font Name menu item
Notes:
•Resident is the factory default setting. It shows the factory default set of fonts downloaded into RAM.
•Download shows all the fonts downloaded into RAM.
•All shows all fonts available to any option.
Identifies a specific font and the option where it is stored
Notes:
•RO Courier is the factory default setting.
•RO Courier shows the font name, font ID, and storage location in the printer. The font source abbreviation is R for Resident, F for Flash, and D for Download.
Specifies the symbol set for each font name
Notes:
•10U
•12U
•A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown.
Changes the point size for scalable typographic fonts
Notes:
•12 is the factory default setting.
•Point Size refers to the height of the characters in the font.One point equals approximately 1/72 of an inch.
•Point sizes can be increased or decreased in
Understanding printer menus