Understanding jam numbers and locations

When a jam occurs, a message indicating the jam location appears. The following illustration and table list the paper jams that can occur and the location of each jam. Open doors and covers, and remove trays to access jam locations.

1

2

3

4

5

6

7

8

Jam number Jam location

200Standard 250-sheet tray and manual feeder (Tray 1)

201Under the fuser

202In the fuser

230

In the duplex

235In the duplex

Note: This jam number indicates that the paper being used for a duplex print job is not supported.

242

550-sheet tray (Tray 2)

250In the multipurpose feeder

290ADF

Instructions

1Open the front door. Inspect the area behind the front door, and then remove any jams.

2Open the fuser cover. Inspect the area under the cover, and then remove any jams.

3Close the front door.

4Pull Tray 1 out. Inspect the tray area, and then remove any jams.

5Verify that the paper is loaded correctly.

6Reinsert Tray 1.

Pull Tray 1 out. Inspect the tray area, and then remove any jams.

1Inspect the multipurpose feeder, and then remove any jams

2Reinsert Tray 1.

Open the ADF cover, and then remove the jam.

Clearing jams

102

Page 102
Image 102
Lexmark 26C0231, X54x, 26C0230, X544DN manual Understanding jam numbers and locations, 102