Menu item
Enable Manual Fax
On
Off
Memory Use
All receive
Mostly receive
Equal
Mostly sent
All send
Cancel Faxes
Allow
Don't Allow
Caller ID
FSK
DTMF
Fax Send Settings
Menu item
Resolution
Standard
Fine
Super Fine
Ultra Fine
Description
Sets the printer to fax manually only, which requires a line splitter and a telephone hand set
Notes:
•Off is the factory default setting.
•Use a regular telephone to answer an incoming fax job and to dial a fax number.
•Touch # 0 on the numeric keypad to go directly to the Manual Fax function.
Defines the amount of
Notes:
•“All receive” specifies that all the memory is set to receive fax jobs.
•“Mostly receive” specifies that most of the memory is set to receive fax jobs.
•Equal is the factory default setting. Equal splits the memory for sending and receiving fax jobs into equal amounts.
•“Mostly sent” specifies that most of the memory is set to send fax jobs.
•“All send” specifies that all the memory is set to send fax jobs.
Specifies whether the printer may cancel fax jobs
Note: If Cancel Faxes is not enabled, it will not appear as an option.
Specifies the type of caller ID being used
Note: FSK is the factory default setting.
Description
Specifies quality in dots per inch (dpi). A higher resolution gives greater print quality, but it increases the fax transmission time for outgoing faxes.
Note: Standard is the factory default setting.
Understanding printer menus
