Service Tests and Utilities
8Once the tubes system is purged, the following message will be displayed. Lift the window and remove ALL the Setup Printheads from the carriage and install the previously removed printing Printheads into the carriage.
INK STARTUP
Lift window to replace SETUP printheads
9Once all the Printheads are installed, the following message will appear on the front panel. Close the carriage cover and close the window.
INK STARTUP
All printheads
are OK. Close cover and window to continue
10Open the right cover and make sure the Printhead Cleaners are installed in the Service Station.
INK STARTUP
Open right cover and install printhead cleaners
11If media is not loaded, the following message appears on the front panel and you must load media into the Printer.
INK STARTUP
Load paper for calibration
HP DesignJets 1050C and 1055CM Printers Service Manual |