Removal and Installation

Carriage Assembly and Belt

Refer to Figure 41 to Figure 51.

 

Removal

WARNING

Switch off the printer and remove the power cord.

1.Remove the following:

1."Top Cover" see page 8-31.

2."Right Hand Cover" see page 8-4.

3."Left Hand Cover" see page 8-13.

2.Move the carriage to a position where you can access the printhead tube connector (refer to Figure 41).

Printhead tube connector

Figure 41: Carriage Assembly and Belt

8-44

HP DesignJets 1050C and 1055CM Printers Service Manual