Removal and Installation
Right Hand Trim and Window Switch
| Refer to Figure 3. |
| Removal |
WARNING | Switch off the printer and remove the power cable. |
1.Remove the following:
1. "Right Hand Cover" see page
2.Disconnect the Window Switch cable from the Service Station cable.
3.Remove 2 screws (Item 1) that attach the Right Hand Trim (Item 2) to the Printer.
4.Remove the Right Hand Trim (Item 2) from the Printer.
1
2
Figure 3: Right Hand Trim
HP DesignJets 1050C and 1055CM Printers Service Manual |