Removal and Installation

Clutch Assembly and left hand miscellaneous parts

Refer to Figure 19 and Figure 20.

Removal

WARNING

Switch off the printer and remove the power cord.

1.

Remove the following:

 

1.

"Left Hand Cover" see page 8-13.

 

2.

"Ink Supply System Assembly" see page 8-19.

 

From steps 2 to 5, refer to Figure 19.

NOTE

 

 

 

2.Pull apart the two tabs on the Paper Entry gear (item 1) and remove the gear.

3.Using a long screwdriver remove two T-15 screws (item 5) securing the clutch bracket (item 6) to the side chassis.

4.Remove the special T-20 screw (item 2).

NOTE

In the next step the assembly is spring loaded and when the

 

retaining screw is removed it may help to hold the assembly with

 

one hand to avoid loosing parts.

 

 

5.Remove the gears (item 3) and the spring (item 4) in the clutch assembly. Refer to the note above.

.

5

6

 

 

 

4

 

5

 

1

2

3

C607420a

 

 

Figure 19: Clutch Assembly

HP DesignJets 1050C and 1055CM Printers Service Manual

8-21