| Removal and Installation |
|
|
Tensioner |
|
| Refer to Figure 33 to Figure 35. |
| Removal |
| Switch off the printer and remove the power cord. |
WARNING |
1.Remove the following
1. "Left Hand Cover" see page
2.To release the tension on the belt (item 1) from the left hand side of the Printer, squeeze the spring (item 2) using the tensioner wedge clip (item 3) until you hear it click into place (refer to Figure 33).
2
3
1
C607415
Figure 33: Tensioner Assembly
HP DesignJets 1050C and 1055CM Printers Service Manual |