Service Tests and Utilities
WARNING
NOTE
The purpose of this test is to verify the operation of the Paper Axis Motor.
IF POSSIBLE ALWAYS PERFORM THIS TEST BEFORE REPLACING THE PAPER AXIS MOTOR. IF THIS TEST PASSES, DO NOT REPLACE THE PAPER AXIS MOTOR.
The Service Tests work in a special Mode which does NOT require the full Initialization of the Printer. Therefore it is important that once you have finished with the Service Test, you MUST power OFF the Printer and Power ON again before trying to print.
NOTE | Make sure you perform this test with NO media loaded. |
Perform the Paper Axis test as follows:
1In the Service Tests submenu, scroll to "6. Paper Axis" and press Enter.
|
|
|
|
|
|
| Top |
|
|
|
| |
| Service Tests |
|
|
| Back |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| ||
| 3.Hard Disk Drive |
|
|
| − |
|
|
|
|
| ||
| 4. | Ink Pressure System |
|
|
|
|
|
| Make Selection | |||
|
|
|
|
|
| |||||||
|
|
|
|
|
|
| ||||||
| 5. Scan Axis |
|
|
| ↓ |
|
|
|
|
| ||
|
|
|
|
|
|
|
| |||||
| 6. | Paper Axis |
|
|
|
|
|
|
|
| ||
| 7. | Drop Detector |
|
|
| Enter |
|
|
| Press Enter | ||
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
2The test will start and the following messages will appear on the front panel:
|
|
|
|
| PAPER AXIS |
|
| PAPER AXIS |
|
|
|
| |
| Running Paper |
|
|
| Running Paper |
|
| Axis Test... |
|
|
| Axis Test... |
|
|
|
|
|
| pressing clutch |
|
|
|
|
|
|
|
|
HP DesignJets 1050C and 1055CM Printers Service Manual |