HP 1055CM manual Left and Right Rear Covers

Removal and Installation

Left and Right Rear Covers

	Refer to Figure 22.
	Removal
	Switch off the printer and remove the power cord.
WARNING
	Working from the rear of the Printer.
NOTE

1.Remove the T-10 Screw (Item 1) that attaches the left hand rear cover (Item 2) to the Printer.

2.Release the left hand rear cover (Item 2) from the retaining clip (item 3) that attaches the ferrite (item 4) to the rear cover.

3.Remove the T-10 Screw (Item 5) that attaches the right hand rear cover (Item 6) to the Printer.

4.Release the right hand rear cover (Item 6) from the retaining clip.

6

3 2

5

4 1

Figure 22: Left and Right Rear Covers

8-24 HP DesignJets 1050C and 1055CM Printers Service Manual