| Service Calibrations |
|
|
| During the Carriage Height Calibration procedure the Carriage |
NOTE | |
| Assembly has to be moved along the length of the printer for |
| correct calibration. Make sure that the Carriage Assembly is |
| only ever moved by pulling the belt and never by direct contact |
| with the carriage itself (See Figure 2 below). |
|
|
Correct: move using the belt.Incorrect: never move using Carriage Assembly.
Figure 2
1Disconnect the Ink Leak Detector Cable Connector from the back of the printer.
HP DesignJets 1050C and 1055CM Printers Service Manual |