System Error:
Problem
Description:
Corrective Action:
System Error:
Problem
Description:
Corrective Action:
System Error:
Problem
Description:
Corrective Action:
System Error Codes
0000D8 XXXXXXXX
External Library Error.
Refer to System Error Code 070100.
01002D
The Main PCA cannot communicate with the Carriage.
Perform the Electronic Systems Test ⇒ Page
010020
Firmware DIMM Test failure.
Try the following:
n Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reseat the Firmware DIMM, reconnect the power cord and power On the Printer.
n If the Error Code appears again, switch the Power OFF from the
| back of the Printer, disconnect the power cord and Replace the |
| Firmware DIMM. Reconnect the power cord and power On the |
| Printer and check if the Error Code has been resolved. |
| n If the System Error continues, replace the Electronics Module ⇒ |
| Page |
| Only replace one component at a time and check if the error has |
WARNING | |
| gone before replacing another component. Using this procedure |
| you will be able to determine exactly which component failed. |
|
|
HP DesignJets 1050C and 1055CM Printers Service Manual |