Removal and Installation

Trailing Cable

Refer to Figure 36 and Figure 37.

Removal

WARNING

Switch off the printer and remove the power cord.

1.

Remove the following:

 

1.

"Right Hand Cover" see page 8-4.

 

2.

"Left Hand Cover" see page 8-13.

 

3.

"Left Rear Cover" see page 8-24.

 

For steps 2 to 5, refer to Figure 36.

NOTE

 

 

 

2.Manually slide the carriage (item 1) to the left side of the printer.

3.Unclip and remove the trailing cable restraining clip (item 2).

4.Carefully disconnect the trailing cable (item 3) from connectors in the Carriage PCA (item 4).

5.Remove the trailing cable from the trailing cable holder (item 5).

2

3 5

4

1

C607412

Figure 36: Trailing Cable

HP DesignJets 1050C and 1055CM Printers Service Manual

8-39