Removal and Installation
Media Sensor
| Removal |
WARNING | Switch off the printer and remove the power cord. |
1.Remove the following:
1. "Center Guide" see page
2.Carefully remove the media sensor (item 2) from underneath the center guide (item 1) (refer to Figure 25).
2
1
Figure 25: Media Sensor
NOTE | You may also be able to remove the Media Sensor as follows: |
1.Remove the following:
1. "Electronics Module" see page
2.Reach underneath the Center Guide and carefully remove the media sensor by pulling it gently down.
HP DesignJets 1050C and 1055CM Printers Service Manual |