Removal and Installation
NOTE | For the following steps, refer to Figure 48. |
| The rear bushing (item 1) on the carriage assembly is tensioned |
CAUTION | |
| with a spring (item 2). When removing the carriage assembly |
| (item 3) hold the rear bushing on the carriage assembly. |
|
|
16.Remove the carriage assembly (item 3) by sliding it off the slider rods.
17.Remove the belt (item 4) from the carriage assembly by releasing it from retaining clips (item 5) underneath the carriage assembly.
3
2
1
45
Figure 48: Carriage Assembly and Belt
HP DesignJets 1050C and 1055CM Printers Service Manual |