Removal and Installation

NOTE

In the following steps, refer to Figure 15.

8.Remove two T-15 screws (item 1) from the left hand trim.

9.Remove two T-15 screws (item 2) from the rear of the left hand cover which are securing the cover to the left hand side chassis.

NOTE

 

Be careful not to drop the cover once the securing fasteners have

 

 

been removed.

 

 

 

 

10. Remove the left hand cover (item 3) from the printer.

3

2

 

1

4

C607406

Figure 15: Left Hand Cover

HP DesignJets 1050C and 1055CM Printers Service Manual

8-17