System Error Codes
System Error: | 0B0009 |
Problem | Unable to detect Aerosol Fan (Included on the Right Cover). |
Description:
Corrective Action: Try the following:
n Make sure that the Aerosol Fan is connected correctly to the Electronics Module.
n Turn the Printer OFF and disconnect the Aerosol Fan from the Electronics Module. Connect a New Aerosol Fan (comes with the new Right Cover) to the Electronics Module and power ON the Printer. If the New Aerosol Fan functions correctly without any Error Codes then remove the Old Aerosol Fan from the Printer and install the New one.
n If the New Aerosol Fan does not function correctly either, then replace the Electronics Module ⇒ Page
System Error:
Problem
Description:
Corrective Action:
WARNING
0B000A
Primer Shutdown Error.
Try the following:
nCheck that the Primer
nReplace the Service Station ⇒ Page
nIf the Error Code continues, replace the Electronics Module ⇒ Page
Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.
HP DesignJets 1050C and 1055CM Printers Service Manual |