Removal and Installation

NOTE

For steps 3 and 4, refer to Figure 42.

3.Loosen the retaining screw T-9 at the back of the printhead tube connector.

4.Remove the printhead tube connector (refer to Figure 42).

View from the rear

c. Loosen this screw

a. Push in here

a. Push in here

b. Pull here

Printhead tube connector

Figure 42: Carriage Assembly and Belt

5.Move the Printhead tube connector to a safe position.

HP DesignJets 1050C and 1055CM Printers Service Manual

8-45