Removal and Installation

3.Remove the belt (item 1) from the belt motor pulley (item 2) on the right hand side of the Printer (refer to Figure 34)

2

1

Figure 34: Tensioner Assembly

NOTE

For steps 4 to 6, refer to Figure 35.

4.Remove the tensioner pulley (item 1) from the belt (item 2) which is located in the tensioner assembly (item 3).

5.Remove the two T-15 screws (item 4) securing the tensioner assembly to the slider rods (item 5).

6.Remove the tensioner assembly (item 3).

5

4

3

2

4

 

1

Figure 35: Tensioner Assembly

8-38

HP DesignJets 1050C and 1055CM Printers Service Manual