Removal and Installation
Drop Detector Assembly
Refer to Figure 5.
| Removal |
WARNING | Switch off the printer and remove the power cord. |
1.Remove the Printhead Cleaners (Refer to the User Guide).
2.Remove the following
1."Right Hand Cover" see page
2."Service Station Assembly" see page
3.Disconnect the Drop Detector cable from the Service Station Cable.
4.Remove the screw (item 1) that attaches the Drop Detector Assembly (item 2) to the Service Station (item 3).
5.Remove the Drop Detector from the Service Station.
1
2
3
C607436
Figure 5: Drop Detector Assembly
HP DesignJets 1050C and 1055CM Printers Service Manual |