Service Tests and Utilities

bIf you decided to continue with clearing the EEROM, then the following message will appear on the front panel and you should wait until the EEROM has been cleared.

Clearing EEROM.

Please wait.

WARNING

DO NOT POWER OFF THE PRINTER WHILE THE EEROM

 

IS BEING CLEARED BECAUSE THIS COULD DAMAGE

 

THE ELECTRONICS MODULE.

 

c Once the EEROM has been cleared, the following message will

 

be displayed on the front panel.

 

 

 

 

 

Top

 

 

 

EEROM cleared

 

 

 

Back

 

 

 

 

 

 

 

 

 

 

 

 

 

−

 

 

 

 

 

 

 

 

 

 

Press ENTER to continue

 

 

 

↓

 

Press Enter

 

 

 

 

 

 

 

 

 

Enter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

dIn order to recover the calibrations information, perform the Calibrations Backup (⇒ Page 5-19).

eAlso, if necessary, set the Asian PS Fonts (⇒ Page 4-33), selecting the Asian PS font that was set before clearing the

EEROM.

4-40

HP DesignJets 1050C and 1055CM Printers Service Manual