HP 1055CM Tail Deflectors and Rear Platen

Removal and Installation

Tail Deflectors and Rear Platen

	Refer to Figure 21.
	Removal
WARNING	Switch off the printer and remove the power cord.

1.Remove the three Deflectors (item 1) by unclipping them from the Rear Platen (Item 3).

2.Remove two T-10 screws (item 2) on the left and right of the Rear Platen (item 3) and remove the platen.

2

3

1

2 C607401

Figure 21: Tail Deflectors and Rear Platen

HP DesignJets 1050C and 1055CM Printers Service Manual 8-23