Service Calibrations
6Loosen the two T10 screws at the back of the Carriage Assembly.
NOTE | NOTE: The screws should not be removed. |
7Using the belt, and beginning to the left hand side of the starting position (where the left hand edge of the paper is positioned when printing), move the Carriage Assembly back and forth along the length of the printer, you are listening for a scraping sound: if you hear a sound already you may proceed directly with step 9, if not you must lower the Carriage Assembly (step 8), and try again until a scraping sound is heard.
HP DesignJets 1050C and 1055CM Printers Service Manual |