Removal and Installation

3. Remove the T-10 screw (item 1) from the linkage rod (item 2) and the pinch-wheel cam (item 3) (refer to Figure 70).

1

3

2

C607420c

Figure 70: Linkage Rod

NOTE

For steps 4 and 5, refer to Figure 71.

4.Release the right side of the paper entry assembly (item 1) from a retaining hole in the right hand side chassis.

5.Remove the right side of the paper entry assembly (item 1) first and then the left side.

1

C607424

Figure 71: Paper Entry Assembly

HP DesignJets 1050C and 1055CM Printers Service Manual

8-65