Installing the |
Configuring the hardware
All hardware configuration options on the
Once selected, any program that uses the Universal Library initializes the hardware according to these selections.
Caution! Turn off power to all devices connected to the system before making connections. Electrical shock or damage to equipment can result even under
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal Connections. This document is available on our web site at www.mccdaq.com/signals/signals.pdf.
Caution! Always handle components carefully, and never touch connector terminals or circuit components unless you are following ESD guidelines in an appropriate
Avoid touching board surfaces and onboard components. Only handle boards by their edges. Make sure the
The discharge of static electricity can damage some electronic components. Semiconductor devices are especially susceptible to ESD damage.
Connecting the board for I/O operations
Connectors, cables – main I/O connector
The following table lists the board connectors, applicable cables, and compatible accessory products for the
Main connector specifications
Main connectors | Six banks of removable |
Expansion connector | |
Compatible cable for the | |
|
|
Compatible accessory product for the | |
connector | to the |
12
