Speaker System Connection

Connect the speakers using the supplied speaker cords.

To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.).

Installation and Setup

Notes:

Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack base.

If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.

About Ferrite Core

Be sure to attach the ferrite core to the speaker cables (for connecting to this unit).

This ferrite core can reduce noises.

How to attach the ferrite core

1 Press the stopper [a] of the ferrite core to open.

2 Wind the Subwoofer cable once on the ferrite core.

3 Close the ferrite core unitl it clicks.

Note:

Attach the ferrite core near the unit (Refer to the fig.3 and comment.).

The length here is short as much as possible.

15

Page 15
Image 15
LG Electronics DVT418 owner manual Speaker System Connection, How to attach the ferrite core