Karcher Official User Instructions for Sopmaskin KMR 1250
Page 7

KMR 1250 D

User Instructions

English

Prior to initial start-up

Unloading procedure

 

 

Do not use a forklift truck for unloading as it could

!cause damage to the sweeper.

The sweeper has been lashed onto a pallet to ensure that it can be transported safely. The procedure for unpacking the sweeper is as follows:

1. Remove the wooden boards from the pallet and nail them onto the end of the pallet (in front of the sweeper).

2. Detach the wires holding the sweeper in place at the ends of the pallet.

3. Knock away the blocks used for locking the wheels and use them for the support of the wooden planks on the left and right.

4. Drive the sweeper off the pallet and down the ramp made from the boards.

5.The side brush has been tied to the chassis for trans- port. Undo the cord holding it in place.

Pushing the sweeper by hand

If you wish to move the sweeper without using its own drive:

nOpen the engine cover.

n Fold the cover towards the rear; it will be held in place by the pneumatic spring.

ç Turn the lever for allowing freewheeling to position "OFF".

nRelease the handbrake.

nPush the sweeper to the required destination.

Note:

Do not push the sweeper over long distances or move it at a speed greater than 10 km/h (e.g. when it is being towed).

After moving the machine

nPut the parking brake on.

nSet free-wheeling lever to position ”ON”.

31

Page 6 Page 8
Image 7
Page 6 Page 8
Contents KMR 1250 D Ïäçãßåò ÷åéñéóìïý ãéá ôïõò ÷ñÞóôåò User Instructions ContentsExplosion hazard while refuelling For your safetyFire hazard while sweeper is operating On behalf of the environment Main components Intended usage Sweeper functionsPushing the sweeper by hand Prior to initial start-upKMR 1250 D EnglishOperating controls Open fuel tap Adjusting the driver’s seatPreparing the sweeper for use Filling the fuel tank Explosion hazard while refuellingInitial driving trials Starting the sweeperMoving off and sweeping Manual cleaning Cleaning the filterStopping the sweeper and switching off Automatic cleaningLower the hopper 1 + Emptying the waste hopperImportant information Injury hazard Risk of sweeper toppling overSweeping on dry ground Typical applicationsSweeping on damp or wet ground Picking up larger items sticks, tins, etc Shutting the sweeper down for longer periodsOvercoming obstacles Transporting the sweeper Cleaning and careFirst engine oil change MaintenanceDaily maintenance Maintenance intervalsMaintenance tasks Filling up with oil Changing the engine oil Checking tyre pressures Checking the oil levelCleaning or replacing the air cleaner Clean fuel filterChecking the hydraulic system Safety information Replacing the sealing skirts Replace light unitReplacing the side brush Adjusting the sweeping pattern Replacing the main brush roller Replacing the dust filters Replacing fusesTroubleshooting Hydraulic Fluid Technical specificationsKMR 1250 D Karcher KONFORMITÄTSERKLÄRUNG-EG Ionella

KMR 1250 D specifications

The Karcher KMR 1250 D is a cutting-edge, multifunctional cleaning machine that has become a key player in the realms of industrial and commercial cleaning. This versatile model combines powerful performance with innovative technology, designed to tackle a variety of cleaning tasks efficiently and effectively. Whether it's large outdoor areas, warehouses, or manufacturing facilities, the KMR 1250 D is built to deliver exceptional results.

One of the standout features of the Karcher KMR 1250 D is its robust design. The machine is equipped with a powerful diesel engine that ensures high performance while maintaining energy efficiency. This engine allows the KMR 1250 D to operate in tough conditions and provides the reliability that users expect from Karcher. Its mechanical prowess is complemented by an advanced hydrostatic drive system that allows for smooth acceleration and deceleration, enhancing overall maneuverability.

The KMR 1250 D showcases Karcher's commitment to cutting-edge cleaning technology. It features a sophisticated integrated water recycling system, which helps minimize water usage and enables longer operation times without frequent refills. The integrated traction control system ensures optimal grip on various surfaces, allowing the machine to navigate through slippery or uneven terrains effortlessly.

Additionally, the KMR 1250 D boasts an adjustable cleaning width, enabling users to customize the machine to suit specific cleaning areas. Users can choose between various attachment options, including sweeping and scrubbing heads, ensuring adaptability to different cleaning tasks. This modularity makes it an ideal choice for a wide range of environments, from large parking lots to production floors.

Safety is a priority with the KMR 1250 D, featuring multiple safety mechanisms to protect both the operator and the machine. The ergonomic design ensures that operators can maintain comfort during extended use, contributing to higher productivity levels.

In summary, the Karcher KMR 1250 D is a versatile cleaning machine equipped with powerful diesel technology, an efficient water recycling system, and adjustable cleaning capabilities. Its robust design, coupled with innovative features, ensures that it performs exceptionally well in various environments while prioritizing operator comfort and safety. Whether addressing large cleaning tasks or maintaining industrial spaces, the Karcher KMR 1250 D stands out as a reliable and efficient solution.
Top Page Image Contents