Karcher KMR 1250 D Replace light unit, Replacing the sealing skirts, Replacing the side brush

Page 21

KMR 1250 D

User Instructions

English

Replacing the sealing skirts

Direction of travel

The sealing skirts fulfil an important function. They retain the partial vacuum in the area round the brushes which is es- sential so that the sweeper can function properly. They ensure that sweeping can take place without clouds of dust being formed at the same time. If the sealing skirts are damaged or worn out, they must be replaced immediately.

nPark the sweeper and switch off the engine.

nRemove the retaining screws and detach the sealing skirts.

nFit new skirts, and align them as follows:

The side skirts should be adjusted so that they clear the ground by 1–3 mm.

The rear skirt should be adjusted so that they clear the ground by 1–5 mm.

nThe front skirt cannot be adjusted. Replace the skirt as soon as you see signs of excessive wear.

nTighten the retaining screws.

Replacing the side brush

n Park the sweeper and switch off the engine.

nRaise the side brush.

n Remove the three hex-socket bolts (5 mm Allen key). n Detach the side brush.

n Push the new side brush onto the drive pin. n Refit and tighten the three hex-socket bolts.

Replace light unit

n Stop the machine and turn it off n Take out the ignition key

n Undo 6 screws S on the panel n Remove the panel 1

n Unscrew the Phillips screw between the supports of the lamp holder on the defective headlight

n Turn the lens of the defective headlight anti-clockwise about 1/4 of a turn 2 and take out reflector housing 3

n Replace light unit

nInsert reflector housing with new light unit in panel again

from below and secure with about 1/4 of a turn clockwi- se. Make certain it engages properly, the label HALOGEN on the headlight glass must be able to be read horizontally 4

nScrew in again the screw between the supports, then secure the panel with the 6 screws.

45

Page 20 Page 22
Image 21
Page 20 Page 22
Contents KMR 1250 D Ïäçãßåò ÷åéñéóìïý ãéá ôïõò ÷ñÞóôåò User Instructions ContentsFor your safety Explosion hazard while refuellingFire hazard while sweeper is operating On behalf of the environment Main components Intended usage Sweeper functionsKMR 1250 D Prior to initial start-upEnglish Pushing the sweeper by handOperating controls Preparing the sweeper for use Adjusting the driver’s seatFilling the fuel tank Explosion hazard while refuelling Open fuel tapStarting the sweeper Initial driving trialsMoving off and sweeping Stopping the sweeper and switching off Cleaning the filterAutomatic cleaning Manual cleaningImportant information Injury hazard Emptying the waste hopperRisk of sweeper toppling over Lower the hopper 1 +Typical applications Sweeping on dry groundSweeping on damp or wet ground Shutting the sweeper down for longer periods Picking up larger items sticks, tins, etcOvercoming obstacles Transporting the sweeper Cleaning and careDaily maintenance MaintenanceMaintenance intervals First engine oil changeMaintenance tasks Filling up with oil Changing the engine oil Checking tyre pressures Checking the oil levelClean fuel filter Cleaning or replacing the air cleanerChecking the hydraulic system Safety information Replace light unit Replacing the sealing skirtsReplacing the side brush Adjusting the sweeping pattern Replacing the main brush roller Replacing the dust filters Replacing fusesTroubleshooting Hydraulic Fluid Technical specificationsKMR 1250 D Karcher KONFORMITÄTSERKLÄRUNG-EG Ionella

KMR 1250 D specifications

The Karcher KMR 1250 D is a cutting-edge, multifunctional cleaning machine that has become a key player in the realms of industrial and commercial cleaning. This versatile model combines powerful performance with innovative technology, designed to tackle a variety of cleaning tasks efficiently and effectively. Whether it's large outdoor areas, warehouses, or manufacturing facilities, the KMR 1250 D is built to deliver exceptional results.

One of the standout features of the Karcher KMR 1250 D is its robust design. The machine is equipped with a powerful diesel engine that ensures high performance while maintaining energy efficiency. This engine allows the KMR 1250 D to operate in tough conditions and provides the reliability that users expect from Karcher. Its mechanical prowess is complemented by an advanced hydrostatic drive system that allows for smooth acceleration and deceleration, enhancing overall maneuverability.

The KMR 1250 D showcases Karcher's commitment to cutting-edge cleaning technology. It features a sophisticated integrated water recycling system, which helps minimize water usage and enables longer operation times without frequent refills. The integrated traction control system ensures optimal grip on various surfaces, allowing the machine to navigate through slippery or uneven terrains effortlessly.

Additionally, the KMR 1250 D boasts an adjustable cleaning width, enabling users to customize the machine to suit specific cleaning areas. Users can choose between various attachment options, including sweeping and scrubbing heads, ensuring adaptability to different cleaning tasks. This modularity makes it an ideal choice for a wide range of environments, from large parking lots to production floors.

Safety is a priority with the KMR 1250 D, featuring multiple safety mechanisms to protect both the operator and the machine. The ergonomic design ensures that operators can maintain comfort during extended use, contributing to higher productivity levels.

In summary, the Karcher KMR 1250 D is a versatile cleaning machine equipped with powerful diesel technology, an efficient water recycling system, and adjustable cleaning capabilities. Its robust design, coupled with innovative features, ensures that it performs exceptionally well in various environments while prioritizing operator comfort and safety. Whether addressing large cleaning tasks or maintaining industrial spaces, the Karcher KMR 1250 D stands out as a reliable and efficient solution.
Top Page Image Contents