Karcher KMR 1250 D manual Checking tyre pressures Checking the oil level

Page 18

English

User Instructions

KMR 1250 D

Checking tyre pressures

Checking the oil level

MAX

MIN

Filling up with oil

Changing the engine oil

nPark the sweeper on a level surface.

nCheck the air pressure in each tyre and correct it where necessary.

Air pressure for front and rear tyres = 6 bar.

nPark the sweeper on a level surface. Pull out the dipstick.

nWipe the dipstick clean and re-insert it in the filler hole.

nPull out the dipstick again and check the result.

The oil level should be between the MIN and MAX marks. If the oil level is below MIN – top up with oil.

If the oil level is above MAX – drain off the surplus.

nInsert the dipstick back into the filler hole.

nPour engine oil type SAE 15 W 40 into the hole for the dipstick.

!Caution! Danger to the environment from engine oil

After carrying out an oil change, ensure that the waste oil is passed to an appropriate collection point or official disposal company.

!Caution,

nRun the engine until it reaches its normal operating tem- perature.

nMake sure the sweeper is standing on a level surface.

nOpen the unit cover.

nPlace a drip pan under the engine.

çHold the end of the drain tube over the drip pan and let the old oil run out.

nClose off the end of the drain tube again.

nPour engine oil into the filler hole. Capacity = 1.1 litres

nCheck the oil level with the dipstick – see “Checking the oil level”.

nWipe up any oil spillage and dispose of the waste oil appropriately.

42

Page 17 Page 19
Image 18
Page 17 Page 19
Contents KMR 1250 D Ïäçãßåò ÷åéñéóìïý ãéá ôïõò ÷ñÞóôåò Contents User InstructionsFor your safety Explosion hazard while refuellingFire hazard while sweeper is operating On behalf of the environment Intended usage Sweeper functions Main componentsEnglish Prior to initial start-upKMR 1250 D Pushing the sweeper by handOperating controls Filling the fuel tank Explosion hazard while refuelling Adjusting the driver’s seatPreparing the sweeper for use Open fuel tapStarting the sweeper Initial driving trialsMoving off and sweeping Automatic cleaning Cleaning the filterStopping the sweeper and switching off Manual cleaningRisk of sweeper toppling over Emptying the waste hopperImportant information Injury hazard Lower the hopper 1 +Typical applications Sweeping on dry groundSweeping on damp or wet ground Shutting the sweeper down for longer periods Picking up larger items sticks, tins, etcOvercoming obstacles Cleaning and care Transporting the sweeperMaintenance intervals MaintenanceDaily maintenance First engine oil changeMaintenance tasks Checking tyre pressures Checking the oil level Filling up with oil Changing the engine oilClean fuel filter Cleaning or replacing the air cleanerChecking the hydraulic system Safety information Replace light unit Replacing the sealing skirtsReplacing the side brush Adjusting the sweeping pattern Replacing the main brush roller Replacing fuses Replacing the dust filtersTroubleshooting Technical specifications Hydraulic FluidKMR 1250 D Karcher KONFORMITÄTSERKLÄRUNG-EG Ionella

KMR 1250 D specifications

The Karcher KMR 1250 D is a cutting-edge, multifunctional cleaning machine that has become a key player in the realms of industrial and commercial cleaning. This versatile model combines powerful performance with innovative technology, designed to tackle a variety of cleaning tasks efficiently and effectively. Whether it's large outdoor areas, warehouses, or manufacturing facilities, the KMR 1250 D is built to deliver exceptional results.

One of the standout features of the Karcher KMR 1250 D is its robust design. The machine is equipped with a powerful diesel engine that ensures high performance while maintaining energy efficiency. This engine allows the KMR 1250 D to operate in tough conditions and provides the reliability that users expect from Karcher. Its mechanical prowess is complemented by an advanced hydrostatic drive system that allows for smooth acceleration and deceleration, enhancing overall maneuverability.

The KMR 1250 D showcases Karcher's commitment to cutting-edge cleaning technology. It features a sophisticated integrated water recycling system, which helps minimize water usage and enables longer operation times without frequent refills. The integrated traction control system ensures optimal grip on various surfaces, allowing the machine to navigate through slippery or uneven terrains effortlessly.

Additionally, the KMR 1250 D boasts an adjustable cleaning width, enabling users to customize the machine to suit specific cleaning areas. Users can choose between various attachment options, including sweeping and scrubbing heads, ensuring adaptability to different cleaning tasks. This modularity makes it an ideal choice for a wide range of environments, from large parking lots to production floors.

Safety is a priority with the KMR 1250 D, featuring multiple safety mechanisms to protect both the operator and the machine. The ergonomic design ensures that operators can maintain comfort during extended use, contributing to higher productivity levels.

In summary, the Karcher KMR 1250 D is a versatile cleaning machine equipped with powerful diesel technology, an efficient water recycling system, and adjustable cleaning capabilities. Its robust design, coupled with innovative features, ensures that it performs exceptionally well in various environments while prioritizing operator comfort and safety. Whether addressing large cleaning tasks or maintaining industrial spaces, the Karcher KMR 1250 D stands out as a reliable and efficient solution.
Top Page Image Contents