Trane RT-PRC007-EN manual LP Conversion Kit

Page 44

Mechanical Specifications

LP Conversion Kit

Field installed conversion kit shall provide orifice(s) for simplified conversion to liquefied propane gas. No change of gas valve shall be required.

BAYSENS006* — Zone Sensor has one temperature setpoint lever, heat, off or cool system switch, fan auto or fan on switch. Manual changeover.These sensors are for CV units only.

BAYSENS008* — Zone Sensor has two temperature setpoint levers, heat, auto, off, or cool system switch, fan auto or fan on switch. Auto changeover.These sensors are used with CV units.

BAYSENS010* — Zone Sensor has two temperature set point levers, heat, auto, off, or cool system switch, fan auto or fan on switch. Status indication LED lights, System on, Heat, Cool, and Service are provided.These sensors are used with CV units.

BAYSENS013* — Zone temperature sensor with timed override buttons used withTracer® Integrated Comfort system.

BAYSENS014* — Zone temperature sensor with local temperature adjustment control and timed override buttons used withTracer Integrated Comfort system. May also be used for Morning Warm-up setpoint and sensor.

BAYSENS016* —Temperature Sensor is a bullet or pencil type sensor that could be used for temperature input such as return air duct temperature.

BAYSENS017* — Remote Sensor can be used for remote zone temperature sensing capabilities when zone sensors are used as remote panels or as a morning warm-up sensor for use with VAV units or as a zone sensor withTracer Integrated Comfort system.

BAYSENS019* & BAYSENS020* — Electronic programmable sensors with auto or manual changeover with seven day programming. Keyboard selection of heat, cool, auto fan or on. All programmable sensors have System on, Heat, Cool, Service LED/LCD indicators as standard. Night setback sensors have two occupied, and two unoccupied programs per day. Sensors are available for CV zone temperature control and VAV zone temperature control.

BAYSENS021* — Zone Sensor with supply air single temperature setpoint and AUTO/OFF system switch. Status indication LED lights, System ON, Heat, Cool, and Service are provided. Sensors are available to be used withVAV units.

BAYSTAT023* — Remote Minimum Position Potentiometer is used to remotely specify the minimum economizer position.

44

RT-PRC007-EN

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Packaged Rooftop Air Conditioners Introduction American Standard IncContents Optional Features Features and BenefitsStandard Features Proven DesignThroughTesting and Research Trane 3-DScroll CompressorSimple Design with 70% Fewer Parts LowTorque VariationFeatures Benefits Quality and ReliabilityMicro Controls MicroRigorousTesting Ease of InstallationSingle Point Power FC Fans with Inlet GuideVanesEasy to Service ValueVariTrac Application Recommendations Power Exhaust Fan Exhaust Air OptionsBarometric Relief Dampers Altitude CorrectionsDuct Design Acoustical ConsiderationsClearance Requirements Selection Procedure Supply Air FanAir Delivery Procedure Electric Heating SystemNatural Gas Heating System Unit Electrical RequirementsModel Number Description General Data Table GD-1 General Data 27 1/2 30 TonsTable GD-2- General Data 35-40Ton Table GD-3- General Data 50Ton Table PD-3 Gas Heating Capacity Altitude Correction Factors Performance Adjustment FactorsTable PD-1- Enthalpy of Saturated AIR Table PD-5- 30Ton Gross Cooling Capacities Mbh Performance DataTable PD-4 27 1/2 Ton Gross Cooling Capacities MBh Table PD-6 35Ton Gross Cooling Capacities Mbh Table PD-7 40Ton Gross Cooling Capacities MbhTable PD-8 50Ton Gross Cooling Capacities MBh Table PD-11 Natural Gas Heating Capacities Table PD-9 Electric Heat AirTemperature RiseTable PD-10 Available Electric Heat KW Ranges Table PD-12 Supply Fan Performance 27½ 35Ton Static Pressure in. wg1Table PD-13 Supply Fan Performance 40 and 50Ton Gas Heat Electric Heat3 ID Coil Table PD-14 Component Static Pressure Drops in.W.G.1Heating System Filters2 Nominal Nominal Drive Table PD-15 Supply Air Fan Drive Selections20 HP Table PD-16- Power Exhaust Fan Performance Controls VAV Units OnlyCV Units Only Unoccupied ZoneTemperature Control Cooling and Heating Supply AirTemperingAuto Changeover ConventionalThermostat InterfaceOccupied/Unoccupied Switching Fan Failure SwitchCoil Freeze Protection Frostat Night Setback SensorsSet 2. Rooftop units with Electric Heat Electrical Service SizingElectrical Data Table ED-2 27½-50Ton Electrical Service Sizing Data1 Dimensional Data Figure DD-1 27 1/2 35Tons TC,TE,YC Low HeatDimensional Data Figure DD-3 40-50Tons TC,TE,YC Low & High Heat Dimensional Field Installed SensorsConstant CV and VAV Integrated Comfort System SensorsWeights TableW-2 Point Loading AverageWeight1TableW-3 ComponentWeights TableW-4 Minimum Operating Clearances for Unit InstallationMechanical Specifications Unit Options Accessories LP Conversion Kit 20-60Ton Literature Order Number File Number PL-RT-TC/TE/YC-27½ 50-TONS-PRC0007-EN-10-2001

RT-PRC007-EN specifications

The Trane RT-PRC007-EN is a part of Trane’s highly regarded line of air-cooled chillers, designed to provide exceptional performance and efficiency for a variety of commercial applications. This model is known for its robust engineering and cutting-edge technologies, making it a favored choice among facility managers and HVAC professionals.

One of the key features of the RT-PRC007-EN is its energy efficiency. Its advanced compressor design, alongside innovative heat exchanger technology, allows it to achieve significant energy savings, meeting or exceeding standards set by the Department of Energy. This efficiency not only results in lower operational costs but also contributes to a smaller carbon footprint, making it an environmentally friendly choice.

The chiller is equipped with variable speed compressors which adjust their output in relation to the cooling demand. This feature ensures optimal performance at all times, reducing energy consumption during partial load operations. Additionally, the RT-PRC007-EN incorporates Trane's unique Adaptive Control technology. This intelligent control system continuously monitors system parameters and environmental conditions, optimizing performance in real-time to ensure reliable operation.

Another standout characteristic of the RT-PRC007-EN is its quiet operation. The inclusion of sound-dampening technology and strategically placed acoustic insulation allows this chiller to operate with minimal noise, making it suitable for installations in noise-sensitive environments like hospitals or schools.

Durability is another hallmark of the RT-PRC007-EN. Built with high-quality materials, it is designed to withstand harsh operating conditions. Its corrosion-resistant components ensure longevity and reduce the need for extensive maintenance, making it a reliable choice for operators.

Lastly, the RT-PRC007-EN comes with a variety of customization options, including different refrigerant types, control systems, and capacity configurations. This flexibility allows it to adapt to the specific needs of different applications and building designs.

In summary, the Trane RT-PRC007-EN represents a fusion of efficiency, reliability, and advanced technology, making it an excellent option for those seeking a cutting-edge air-cooled chiller for their commercial HVAC needs.
Top Page Image Contents