Trane RT-PRC007-EN manual Easy to Service, Value

Page 8

Features and Benefits

Easy to Service

Because today’s owners are very cost- conscious when it comes to service and maintenance, theTrane Voyager was designed with direct input from service contractors.This valuable information helped to design a product that would get the serviceman off the job quicker and save the owner money. Voyager does this by offering:

A Simpler Design

The Voyager design uses fewer parts than previous units. Since it is simpler in design, it is easier to diagnose.

Micro

The Micro requires no special tools to run the Voyager unit through its paces. Simply place a jumper betweenTest 1 andTest 2 terminals on the Low Voltage Terminal Board and the unit will walk through its operational steps automatically.

—The unit automatically returns control to the zone sensor after stepping through the test mode a single time, even if the jumper is left on the unit.

As long as the unit has power and the “system on” LED is lit, the Micro is operational.The light indicates that the Micro is functioning properly.

The Micro features expanded diagnostic capabilities when utilized withTrane’s Integrated Comfort™ Systems.

Some Zone Sensor options have central control panel lights which indicate the mode the unit is in and possible diagnostic information (dirty filters for example).

Easy Access LowVoltageTerminal Board

Voyager’s Low VoltageTerminal Board is external to the electrical control cabinet. It is extremely easy to locate and attach the thermostat wire.This is another cost and time-saving installation feature.

Value

Low Ambient Cooling

All Voyager Commercial units have cooling capabilities down to 0 F as standard.

Power Exhaust Option

Provides exhaust of the return air when using an economizer to maintain proper building pressurization. Great for relieving most building overpressurization problems.

Micro Benefits

The Micro in theVoyager units has built- in anti-short-cycle timer, time delay relay and minimum “on” time controls.These controls are functions of the Micro and are factory tested to assure proper operation.

The Micro softens electrical “spikes” by staging on fans, compressors and heaters.

Intelligent Fallback is a benefit to the building occupant. If a component goes astray, the unit will continue to operate at predetermined temperature setpoint.

Intelligent Anticipation is a standard feature of the Micro. It functions constantly as the Micro and zone sensor work together in harmony to provide tighter comfort control than conventional electro-mechanical thermostats.

Horizontal Discharge with Power Exhaust Option

8

RT-PRC007-EN

Image 8
Contents Packaged Rooftop Air Conditioners Introduction American Standard IncContents Optional Features Features and BenefitsStandard Features Proven DesignThroughTesting and Research Trane 3-DScroll CompressorSimple Design with 70% Fewer Parts LowTorque VariationFeatures Benefits Quality and ReliabilityMicro Controls MicroRigorousTesting Ease of InstallationSingle Point Power FC Fans with Inlet GuideVanesEasy to Service ValueVariTrac Application Recommendations Power Exhaust Fan Exhaust Air OptionsBarometric Relief Dampers Altitude CorrectionsDuct Design Acoustical ConsiderationsClearance Requirements Selection Procedure Supply Air FanAir Delivery Procedure Electric Heating SystemNatural Gas Heating System Unit Electrical RequirementsModel Number Description General Data Table GD-1 General Data 27 1/2 30 TonsTable GD-2- General Data 35-40Ton Table GD-3- General Data 50Ton Table PD-3 Gas Heating Capacity Altitude Correction Factors Performance Adjustment FactorsTable PD-1- Enthalpy of Saturated AIR Table PD-5- 30Ton Gross Cooling Capacities Mbh Performance DataTable PD-4 27 1/2 Ton Gross Cooling Capacities MBh Table PD-6 35Ton Gross Cooling Capacities Mbh Table PD-7 40Ton Gross Cooling Capacities MbhTable PD-8 50Ton Gross Cooling Capacities MBh Table PD-11 Natural Gas Heating Capacities Table PD-9 Electric Heat AirTemperature RiseTable PD-10 Available Electric Heat KW Ranges Table PD-12 Supply Fan Performance 27½ 35Ton Static Pressure in. wg1Table PD-13 Supply Fan Performance 40 and 50Ton Gas Heat Electric Heat3 ID Coil Table PD-14 Component Static Pressure Drops in.W.G.1Heating System Filters2 Nominal Nominal Drive Table PD-15 Supply Air Fan Drive Selections20 HP Table PD-16- Power Exhaust Fan Performance Controls VAV Units OnlyCV Units Only Unoccupied ZoneTemperature Control Cooling and Heating Supply AirTemperingAuto Changeover ConventionalThermostat InterfaceOccupied/Unoccupied Switching Fan Failure SwitchCoil Freeze Protection Frostat Night Setback SensorsSet 2. Rooftop units with Electric Heat Electrical Service SizingElectrical Data Table ED-2 27½-50Ton Electrical Service Sizing Data1 Dimensional Data Figure DD-1 27 1/2 35Tons TC,TE,YC Low HeatDimensional Data Figure DD-3 40-50Tons TC,TE,YC Low & High Heat Dimensional Field Installed SensorsConstant CV and VAV Integrated Comfort System SensorsWeights TableW-2 Point Loading AverageWeight1TableW-3 ComponentWeights TableW-4 Minimum Operating Clearances for Unit InstallationMechanical Specifications Unit Options Accessories LP Conversion Kit 20-60Ton Literature Order Number File Number PL-RT-TC/TE/YC-27½ 50-TONS-PRC0007-EN-10-2001

RT-PRC007-EN specifications

The Trane RT-PRC007-EN is a part of Trane’s highly regarded line of air-cooled chillers, designed to provide exceptional performance and efficiency for a variety of commercial applications. This model is known for its robust engineering and cutting-edge technologies, making it a favored choice among facility managers and HVAC professionals.

One of the key features of the RT-PRC007-EN is its energy efficiency. Its advanced compressor design, alongside innovative heat exchanger technology, allows it to achieve significant energy savings, meeting or exceeding standards set by the Department of Energy. This efficiency not only results in lower operational costs but also contributes to a smaller carbon footprint, making it an environmentally friendly choice.

The chiller is equipped with variable speed compressors which adjust their output in relation to the cooling demand. This feature ensures optimal performance at all times, reducing energy consumption during partial load operations. Additionally, the RT-PRC007-EN incorporates Trane's unique Adaptive Control technology. This intelligent control system continuously monitors system parameters and environmental conditions, optimizing performance in real-time to ensure reliable operation.

Another standout characteristic of the RT-PRC007-EN is its quiet operation. The inclusion of sound-dampening technology and strategically placed acoustic insulation allows this chiller to operate with minimal noise, making it suitable for installations in noise-sensitive environments like hospitals or schools.

Durability is another hallmark of the RT-PRC007-EN. Built with high-quality materials, it is designed to withstand harsh operating conditions. Its corrosion-resistant components ensure longevity and reduce the need for extensive maintenance, making it a reliable choice for operators.

Lastly, the RT-PRC007-EN comes with a variety of customization options, including different refrigerant types, control systems, and capacity configurations. This flexibility allows it to adapt to the specific needs of different applications and building designs.

In summary, the Trane RT-PRC007-EN represents a fusion of efficiency, reliability, and advanced technology, making it an excellent option for those seeking a cutting-edge air-cooled chiller for their commercial HVAC needs.