Honeywell F52F manual ONE-CELL Model Shown

Page 6

ONE-CELL MODEL SHOWN.

ON

WASH

CHECK

When the fan stops, the neon light goes out, as does the ON LED on the Solid State Performance Indicator. The air cleaner is off until the heating or air conditioning and fan start again.

If you do not want the air cleaner to run, set the ON-OFF switch to OFF to turn off the air cleaner. Your furnace and air conditioner will still operate normally, but without the added benefit of air cleaning. Normally, this switch should be ON at all times.

ONE-CELL MODEL SHOWN.

69-0419—2

4

Image 6

Contents Electronic AIR Cleaner Page Contents Solid State Performance Indicator Operating Your Electronic AIR Cleaner ONE-CELL Model ShownONE-CELL Model Shown Getting the Most from Your AIR Cleaner Cleaning the Cells and Prefilter Setting a regular cleaning scheduleRemoving the electronic cells and prefilter StepCleaning the prefilter Burn hazard Can cause personal injuryStep Step Washing the cells CleaningReplacing air cleaner components At a car washCell Latch Insert TOP of Screen Close the door and fasten it with the two door latches Particle size HOW Electronic AIR Cleaning WorksWord about PostageCleaner works How the airAir cleaner Vs. the standardFurnace filter Ozone Vs. the airIonizer ElectronicAbout lint or White dustBefore YOU Call for Service IF… THEN…69-0419-2 Honeywell 10 Year Clean Coil Guarantee GuaranteeHow to register your guarantee 69-0419-2 Save Even More Energy With These Honeywell Accessories Limited TWO-YEAR Warranty Home and Building Control