Honeywell F52F manual Close the door and fasten it with the two door latches

Page 16

STEP 4

Close the door and fasten it with the two door latches.

TURN LATCH

F52 ACCESS

DOOR

M7814

STEP 5

Turn on system fan. If the cell(s) and prefilter are wet, the neon light may not come on and you may hear arcing. If the arcing is annoying, simply turn off the air cleaner for 2 to 3 hours or until the cell(s) are dry.

If your air cleaner has a Solid State Performance Indicator, the CHECK LED may come on if you install wet cell(s) and prefilter. Again, if the neon light or the CHECK LED annoys you, simply turn off the air cleaner for 2 to 3 hours or until the cell(s) and prefilter are dry.

69-0419—2

14

Image 16

Contents Electronic AIR Cleaner Page Contents Solid State Performance Indicator Operating Your Electronic AIR Cleaner ONE-CELL Model ShownONE-CELL Model Shown Getting the Most from Your AIR Cleaner Cleaning the Cells and Prefilter Setting a regular cleaning scheduleRemoving the electronic cells and prefilter StepCleaning the prefilter Burn hazard Can cause personal injuryStep Step Cleaning Replacing air cleaner componentsWashing the cells At a car washCell Latch Insert TOP of Screen Close the door and fasten it with the two door latches HOW Electronic AIR Cleaning Works Word aboutParticle size PostageCleaner works How the airVs. the standard Air cleanerFurnace filter Vs. the air IonizerOzone ElectronicAbout lint or White dustBefore YOU Call for Service IF… THEN…69-0419-2 Guarantee Honeywell 10 Year Clean Coil GuaranteeHow to register your guarantee 69-0419-2 Save Even More Energy With These Honeywell Accessories Limited TWO-YEAR Warranty Home and Building Control