F114 AND F115 CEILING SURFACE MOUNTED MEDIA AIR CLEANERS
MEDIA AIR
CLEANER 
1
AIR SPACE
TO BE
CLEANED
1 DISCHARGE AIR FLOW IN ANY DIRECTION IS ACCEPTABLE.
M11694
| Fig. 3. Choose location for air cleaners. | ||
| When selecting a location, make sure the air | CAUTION | |
IMPORTANT |
| ||
| cleaner is secured to ceiling | Electrical Shock Hazard. | |
| or joists. If installing on a | Power source can shock. | |
| the air cleaner to the true ceiling. | • Do not connect the power source until after the air | |
INSTALLATION | cleaner is mounted. This will prevent electrical | ||
• Be sure to turn off the air cleaner before servicing | |||
|
| shock or equipment damage. | |
When Installing this Product… | it. | ||
• If the air cleaner must be turned on for an | |||
|
| electrical check, be extremely cautious. | |
1. Read these instructions carefully. Failure to follow | • Be cautious when working near the moving parts | ||
of the air cleaner. | |||
| them could damage the product or cause a hazardous | ||
| condition. | Mount and Wire the Air Cleaner | |
2. | Check the ratings given in the instructions and on the | ||
| product to make sure the product is suitable for your |
| |
| application. | CAUTION | |
3. | Installer must be a trained, experienced service | ||
| technician. | Eye Exposure. | |
4. | After installation is complete, check out product | Harmful dust can obstruct or injure unshielded | |
| operation as provided in these instructions. | eyes. | |
A CPZ™ module usually releases dust when it is handled.
Always wear safety glasses when installing or removing CPZ™ canisters.
4 |