Installation
COAXIAL MOUNT WITHOUT GRILL
Prepare The Midrange Remove any posts or plugs in the Midrange. It should look like the pic
shown here.
Next you will need to remove the Driver Boot from the back of the Midrange. It is a friction fit, simply pull it straight off the back.
Prepare The Tweeter
You will need to have the Tweeter, Tweeter Mounting Post and your choice of Tweeter Mounting Ring (Blue or Black).
Insert the Tweeter into Tweeter Mounting Post and tighten by turning
Next attach the Tweeter Mount Ring and tighten by turn- ing
You should now have a tweeter assembly that looks like this to insert into your Midrange.
Insert the tweeter assembly into the midrange while feeding the wire through the Midrange’s motor as pictured. Tighten by turning
Lay the tweeter wire in the machined groove on the motor back plate and press Midrange Driver Boot into place. Several inches of the tweeter wire will be exposed to permit wring.
You should now have an assembly that looks like this.
Repeat this process for the second Tweeter and Midrange.
The SS System is now ready to mount.
10 | SS Component Systems |