Kicker SS56.2, SS65.2 manual Wiring, Installation

Page 18

Installation

Wiring

There are three sets of high quality 16 Gauge speaker wire supplied with the Kicker

SSComponent Systems. The longest set of wires is for connecting your amplifier or source unit to the crossover network. One of the shorter pairs is to connect the midrange output of the crossover to the spring loaded binding posts on the Midrange Driver. The last set connects the tweeter output of the crossover to the short wire coming out of the tweeter; join using the supplied Butt Connectors.

If you wish to use your own wire or need to lengthen the wire to fit your needs, we recommend using at least 16 gauge wire.

Use the supplied Allen Wrench to loosen and tighten the connections at the crossover.

Crossover

SSXX.2

Tweeter

SSXX.2

INPUT

MID

TWEETER

+ -

Amplifier
+	-	_	_	_

+ + +

Midrange

18	SS Component Systems

Image 18

Contents Page Models SS65.2 / SS56.2 CROSSOVER FeaturesFeatures TWEETERMIDRANGE FeaturesParts List Parts ListParts List COMPONENT CROSSOVER Two way passive crossover toInstallation Mounting OptionsInstallation SEPARATES WITHOUT GRILL Prepare The MidrangePrepare The Tweeter Installation SEPARATES WITH GRILL Prepare The MidrangePrepare The Tweeter Installation COAXIAL MOUNT WITHOUT GRILLPrepare The Tweeter Installation COAXIAL MOUNT WITH GRILLPrepare The Tweeter WITH ANGLE RINGS Tweeter MountingInstallation WITHOUT ANGLE RINGSInstallation See the diagrams on this pageMidrange Mounting InstallationSS Component Systems Mount Coax with hardware Coaxial MountingInstallation Factory Mounting LocationSeparates Mounting InstallationCrossover Mounting InstallationWiring InstallationInstallation exist or is inaccessible. Drilling holes to runAdjustments Installation16.5 SpecificationsPerformance 13.8SS Component Systems 02022005 + 04SSComp WarrantyWHAT TO DO IF YOU NEED WARRANTY OR SERVICE 74075Earl’s Thoughts SS Component Systems