Installation, Coaxial Mount With Grill

COAXIAL MOUNT WITH GRILL

Prepare The Midrange Remove any posts or plugs in the Midrange. It should look like the pic

shown here.

Next you will need to remove the Driver Boot from the back of the Midrange. It is a friction fit, simply pull it straight off the back.

Prepare The Tweeter

You will need to have the Tweeter, Tweeter Mounting Post and Tweeter Grill Mount Ring (Blue).

Insert the Tweeter into Tweeter Mounting Post and tighten by turning clock-wise.

Save the Tweeter Grill Mount Ring for use later. It is used to attach the Grill.

You should now have a tweeter assembly that looks like this to insert into your Midrange.

Insert the tweeter assembly into the midrange while feeding the wire through the Midrange’s motor as pictured. Tighten by turning clock-wise.

Lay the tweeter wire in the machined groove on the motor back plate and press Midrange Driver Boot into place. Several inches of the tweeter wire will be exposed to permit wring.

After mounting the assembly to your panel, place the grill on the Midrange and secure with the Blue Grill Mount Nut.

Repeat this process for the second Tweeter and Midrange.

Installation

SS Component Systems