Parts List
MIDRANGE DRIVER BOOT Protects the magnet and motor
assembly of the Midrange Driver.
(Already attached to the midrange and is removable.)
MIDRANGE GRILL Grill used to protect the driver when doing a
COMPONENT CROSSOVER Two way passive crossover to
split the audio signal between the tweeter and midrange.
ALLEN WRENCH Supplied tool used to tighten and loosen wire
connections at the crossover.
BEVEL HEAD SCREWS Supplied screws to mount Midrange
Driver and crossover.
TINNERMAN CLIPS Steel spring anchor used as anchor point for
screws if required.
BUTT CONNECTORS Insulated crimp connectors to connect a 16
gauge wire to another 16 gauge wire.
WIRE BUNDLES 3 sets of high quality 16 gauge speaker wire to
connect your SS Series Components to the crossover and amplifier.
Grill Mount Ring.
Shown is an example of how the prongs in the
6 | SS Component Systems |