Honeywell NetAXS, 800-04410 manual 7Configuration System Downstream Devices Tab

Configuring via the Web Server

Configuring the System

2.2.6 Downstream Devices Tab

The NetAXS™ downstream devices provide the NetAXS™ panel with additional inputs and outputs. The NetAXS™ panel supports two downstream board types:

•NX4IN—Provides 32 supervised, four-state inputs that are limited to 2.2K ohms resistance. The NX4IN must be assigned network addresses 1 and 2.

•NX4OUT—Provides two supervised inputs and 16 SPDT relay outputs; each input is limited to 2.2K ohms resistance. The NX4OUT must be assigned network addresses 3-6.

Notes:

•The NX4IN and NX4OUT network addresses are set by the DIP switches on each board. Refer to the NetAXS™ NX4IN/NX4OUT Input/Output Configuration Guide for more information about configuring the NX4IN and NX4OUT boards.

•A NetAXS™ panel supports a maximum of six daisy-chained downstream boards—two NX4IN and four NX4OUT boards. The boards connect to the NetAXS™ panel’s Downstream port (Terminal Block 10).

Click the Downstream Devices tab:

Figure 2-7:Configuration > System > Downstream Devices Tab

The Downstream Devices tab enables you to:

•View and modify the names of the devices that communicate with the panel.

•View the types and addresses of the devices that communicate with the panel.