Honeywell 408EU Paging Feature, Follow-Me Displays, Changing the Pager Follow-Me Phone Number

Paging Feature

Your installer may have programmed your system to send messages with certain system conditions to your pager. An explanation of those messages is provided below.

Follow-Me Displays

The display shown on your pager is "ACCTEXXX" where:

"ACCT" is the 4-digit central station no. 2 account number.

"E" is the event code. There are 4 event types: alarms, troubles, openings, and closings. These event codes are as follows:

Openings = 0, Closings = 1, Alarm or Trouble = 9

If multiple events occur, the signal for the highest-priority event is sent first. Events ranked from highest to lowest priority are alarms, trouble, openings, and closings.

"XXX" is, depending on the event, the zone (001-008) or user (001-014) designation.

Changing the Pager Follow-Me Phone Number

You can change your pager follow-me phone number as follows if your installer enabled this feature:

– 17 –